T-BR1TE
I S D N T - B A S I C R A T E
T R A N S M I S S I O N E X T E N D E R
The ADTRAN T-BR1TE is an economical way of offering Basic Rate ISDN
by extending Basic Rate Service from an ISDN-equipped PBX or switch over
T1 carrier lines to remote locations. Using the T-BR1TE, the S/T-interface
can be deployed from a remote location serving a maximum of 3,000 feet,
making it ideal for customer-owned networks.
P R O D U C T F E A T U R E S
The T-BR1TE is a standard D4 channel unit that plugs into a T1 multi-
plexer such as a D4 channel bank, SLC-96, ADTRAN ACT, or BR1TE bank.
The T-BR1TE transports 2B+D information over T1 carriers by inserting the
two B channels at 64 kbps and a single D channel at 16 kbps into three
DS-0 time slots. The Basic Rate Interface information is transported from a
T-BR1TE in the T1 multiplexer at the switch location, over the T1 carrier, to
the remote T-BR1TE and T1 multiplexer. The T-BR1TE can be optioned as
either the adjacent to the switch unit or the adjacent to the customer unit,
reducing inventory requirements.
■ Extends range of ISDN service
to remote locations
■ Transports ISDN Basic Rate
Interface (2B+D) information
over T1 carriers
■ Provides power for up to eight
terminal equipment units
The T-BR1TE provides a standard 4-wire S/T-interface which operates at
192 kbps full-duplex and utilizes separate twisted wire pairs for transmit
and receive signals. The S/T-interface conforms to the ANSI T1.605-1992
S/T-interface standard and the CCITT I.430 Layer 1 standard.
■ Eliminates the need for an NT1
by delivering the ISDN S/T-
interface directly to the TE
The T-BR1TE can supply power in a PS1 or PS2 arrangement for up to
eight pieces of terminal equipment in a short or extended passive bus. This
power is derived from the T1 multiplexer -48 VDC supply. PS1 (phantom
power) provides power on the transmit and receive wires of the S/T-interface.
PS2 provides power to the terminal equipment over an additional dedicated
pair of wires. In both cases, the T-BR1TE monitors the S/T-interface for an
overcurrent fault condition. In the event of such a condition, the T-BR1TE
automatically limits the amount of current being delivered until the fault
condition is removed.
■ Industry standard D4 channel
unit plugs into ADTRAN ACT or
BR1TE bank
■ Complies with ANSI T1.605-1992
and CCITT I.430 specifications
■ Supports multiple switch
®
vendors including Lucent 5ESS ,
™
Northern Telecom DMS-100 ,
The front panel of the T-BR1TE contains a display, controls, and Bantam
test jacks for local test access.
®
and Siemens EWSD
■ Built-in maintenance and
testability features
■ Provides automatic overcurrent
protection for the S/T Bus
■ Industry leading 5 year
warranty
|
3Com Network Card 980 000048 001 User Manual
Actron Automobile KAL 3840 User Manual
AEG Food Processor KM 21 User Manual
Agilent Technologies Portable Generator 08111 90002 User Manual
Amana Range AER5830VA User Manual
American Audio CD Player PRO DJ 3 User Manual
American Dryer Corp Clothes Dryer AD 670 User Manual
AOSafety Home Safety Product Eyewear Lens User Manual
ATO Speaker System SCM16A User Manual
Audiovox Car Stereo System ACC 50A User Manual